ContactChinese
GULIN COMMERCE > News > Back to Work After the Holiday: Floor and Cleaning Equipment Startup Checklist

Back to Work After the Holiday: Floor and Cleaning Equipment Startup Checklist

Published on 2026-10-08 · Suzhou Industrial Park Gulin Commerce Co., Ltd.

During the break, offices, shops and factories sit nearly closed - lights off, AC off, scrubber dryer parked in a corner. On the first day back, the air feels stale, a layer of dust lies on the floor, and equipment seems to have "slept in." Do not rush to run everything at full load; go through the checklist below item by item so reopening goes smoothly.

Commercial scrubber dryer pre-use inspection before post-holiday restart

1. Flooring: Remove Dust First, Then Inspect Locally

  • Clear surface dust with a vacuum or dust mop first, then wipe with a slightly damp mop - avoid flooding the floor with water at the start.
  • Check high-traffic spots such as the front desk and corridor entrances for curling or blistering, especially areas pressed by heavy objects during the holiday.
  • Take out entrance mats, shake and rinse them - they caught most of the mud and sand tracked inside.
  • Treat local stains with a cleaner matched to the floor material; do not mix strong acids and alkalis.

2. Cleaning Equipment: Do Three Things Before the First Start

After a week idle, squeegee blades on scrubber dryers and vacuums can harden, and batteries may self-discharge. Before real work:

  • Confirm the battery is charged; fully charge units left unused for a long time first.
  • Check brush pads and squeegee blades for aging or deformation, and empty and rinse both the recovery and solution tanks.
  • Run the machine empty for a minute or two to listen for unusual noises before scrubbing, to avoid hard blades leaving streaks.
Commercial PVC resilient floor inspection and care after the holiday

3. Commercial AC and Power: Ventilate First, Then Set Temperature Gradually

  • Open windows and ventilate for 10 to 15 minutes to replace air sealed for days.
  • Clean or replace the filter - dust tends to build up on filters after a holiday.
  • Listen for unusual noises or smells on first start, and set the temperature in two steps; do not jump straight to the coldest or hottest setting.
  • Also glance at the distribution box for tripped breakers - damp weather during the holiday can trigger leakage protection.

These checks take less than half an hour but help avoid the awkwardness of "the machine dying on opening day and the floor slippery." If you find floors need refinishing, or scrubber dryers or ACs need servicing, contact us anytime - flooring materials, commercial appliances and cleaning equipment, all supplied by Gulin Commerce as one package. Call 0512-68114680.

Want to learn more about products or services? Welcome to consult.

Contact Us

FAQ

Flooring Industry FAQ

Q The floor is very dirty on the first day back - can I just mop it with water?

A

Avoid large amounts of water. For resilient flooring such as PVC, first remove loose dust with a vacuum or dust mop, then wipe with a slightly damp mop along the light direction; check areas pressed by heavy objects near entrances for curling or blistering first.

Q What should I watch when starting a scrubber dryer after a holiday?

A

First check the battery is charged, and inspect the brush pad and squeegee blade for aging or deformation. Empty and rinse both the recovery and solution tanks completely, then run it empty for a minute or two before real work, to avoid hard blades failing to clean the floor.

Q Should I ventilate before turning on the commercial AC for the first time after the holiday?

A

Yes. Open windows and ventilate for 10 to 15 minutes first, then start the unit and clean or replace the filter. Listen for unusual noises or smells on the first start, and set the temperature in two steps; do not jump straight to the coldest or hottest.